LoRa sensors are designed so that they will attempt to connect and transmit through any nearby gateways. The most common reason for missing readings is because the sensor cannot reach a gateway. Sensors will attempt to reach any gateway in range, but if there is interference or if the sensor is located at the far end of range for a gateway, you may experience missing readings.
...
If you are using a Public LoRaWAN network provider, or you are using our default Azure network, use one or the other. Ensure that at your facility you have every gateway configured and connected to use the same network. You can use different networks at different facilities, but we never recommend a mixture.
This includes custom gateway hardware that we may have helped you to configure to work on the platform. All gateways which are deployed at the location should all use the same configuration and network.
Always verify sensors are transmitting and have good coverage before calling the install complete
...
There are several advantages to deploying multiple gateways in your facility.
Redundancy - Sensors will attempt to connect with any nearby gateway. If one gateway drops offline for any reason, there is a better chance that nearby sensors will continue transmitting if they can reach an additional gateway as backup.
Improved Signal Strength - If a sensor’s signal strength (RSSI) drops too low, it may have difficulty reliably transmitting readings. The closer a sensor is to a gateway the better, yielding more certainty of capturing every data point and a stronger resistance to any intermittent interference.
...
If your facility has wings where line of sight to nearby gateways is difficult (i.e. it would pass through several walls, including possibly to the exterior and then back to the interior) we recommend deploying a Gateway at both ends of the facility. This way sensors at either end will be able to easily communicate to their gateway and sensors in the middle will be able to use whichever gateway they choose is better.
...