Mounting, Turning On & Configuring Device

1. https://player.vimeo.com/video/877660695 Mount sensor where applicable close to a power outlet (as this is powered by a 12V power adapter that will be provided) https://player.vimeo.com/video/877661991  

...

2. This is a Wifi Enabled device, after mounting, get off the current wifi network, go onto the People Counter wifi (SSID People Counter_XXXXXX. EX: People Counter_F7D7D2)(This is on the bottom side of the device)

3. Accessing the Sensor: Web GUI https://player.vimeo.com/video/877665781  

   1. Once the LED light is BLUE (go to step B)

   2. On Web Browser, login to 192.168.1.1

   3. Set your Password and the Security Questions of your choice.

   4. To change The Password and Security Questions, please navigate to the SYSTEM tab. USERS MODIFY: Resets Password SECURITY QUESTIONS: Reset Security Questions.

...

Image Added

5. For the Installation Height, navigate the the RULES tab under Deployment Parameters, set the correct height, measure with a measuring stick, and set that in Milimeter

6. Once the height is accurate, the Counter is ready to use.

Enabling Dwell Detection

STEP 1

Connect to the VS133 Local WiFi. (Remember to be off local wifi to be able to connect to the devices wifi)

...