Enabling Dwell Detection
STEP 1
Connect to the VS133 Local WiFi. (Remember to be off local wifi to be able to connect to the devices wifi)
STEP 2
Navigate to Rules (Second tab when you log-in to Web UI)
STEP 3
On the Right side of the screen, you will see where it says Counting Strategy. Underneath that you will see where it says Region Monitoring, Please turn that on.
STEP 4
After turning on Region Monitoring, Navigate back to the image of the device, and draw the lines where you would like to detect. Then Click the blue check mark in the dialogue box to save the changes you made.
STEP 5
The Advanced Properties dialog will pop up after saving. In the Advanced Properties dialog box is where you can enable the Dwell Time Detection. Click on blue check mark in dialogue box to save the changes that you have just set. Save again and you’re done.