Ideetron Temperature/Humidity

Open

Activation

1. Pull battery activation strip. The status indicator will change to blue. The sensor device will then attempt to connect with your gateway.

2. After a few moments the status indicator should change to green indicating that the device is connected and ready for use.

Reset

In the event your device is offline or you need to reset it, please follow these steps.

1. Remove the battery cover and remove both AA battery cells from the sensor.

2. Replace both battery cells in the sensor. The status indicator will change to blue. The sensor device will then attempt to connect with your gateway.

3. After a few moments the status indicator should change to green indicating that the device is connected and ready for use.