...
| Code Block |
|---|
[
{
"order": 0,
"label": null,
"variables": [
{
"order": 0,
"label": "Reading Interval",
"type": "string",
"key": "command.interval",
"form": "select",
"min": null,
"max": null,
"required": true,
"hide_on_setup": true,
"help_texts": [{"value": "Device must be online before changing interval setting", "order": 0}],
"default_value": "600",
"values": [
{
"label": "30 seconds",
"value": "30"
},
{
"label": "1 minute",
"value": "60"
},
{
"label": "2 minutes",
"value": "120"
},
{
"label": "5 minutes",
"value": "300"
},
{
"label": "10 minutes",
"value": "600"
},
{
"label": "15 minutes",
"value": "900"
},
{
"label": "20 minutes",
"value": "1200"
},
{
"label": "30 minutes",
"value": "1800"
},
{
"label": "1 hour",
"value": "3600"
},
{
"label": "6 hours",
"value": "21600"
}
]
}
]
}
] |
Notes
| Note |
|---|
Unless specifically required (approved?), do not add interval of less than 10 minutes. It will only lead to hardware and RMA troubles for us. If necessary we can do this as a one-off configuration by issuing downlink commands to hardware via the console, there’s no reason to expose smaller values to users in the UI. |