Page Comparison

...

1. Manually sending downlink commands via the Console.

   1. You can send whatever command you want.

   2. You must know the command/port info to send.

2. Using the commands we’ve added to the device Template.

   1. Users can adjust these settings themselves by simply going to the Settings screen for their device.

   2. Only certain supported commands have been added. In order for commands to be supported they must be added into the Device Template being used.

3. Directly via your myDevices LNS Instance

   1. Requires that we set up a private LNS instance for you first.

   2. You can send whatever command you want.

   3. You must know the command/port info to send.

Sending downlink command from the Console

...

Sending downlink commands via myDevices LNS (Chirpstack)

1. Log into your myDevices LNS instance: https://lns.mydevices.com/#/login

2. Search the device’s DevEUI in the search box at the top of the page.

3. Click the DevEUI from the search results to go to the device’s page.

4. On the Details tab, scroll down to the Enqueue Downlink Payload area:
   

   Image Added

5. In the Port field, enter the port number to send the downlink command on.

6. Check the box to send a confirmed downlink command

7. In the Base64 encoded String field, enter a Base64-encoded downlink payload

8. Click Enqueue Payload to send the payload to the device. Please note that most devices will not pick up the Enqueued Payload until their next check-in.