Activation
Open the unit by removing screws from the plastic cover
Insert the 3.6V AA batteries
Flip the unit over. You’ll see a series of blinking lights while it searches for the network to join.
When you see solid red lights, the device is fully activated and you should see data on the web dashboard.
Screw back on the plastic cover and proceed with installation
Installation
Peel off the included adhesive backing to affix to wall or other object
Reset
Open the unit by removing screws from the plastic cover
Remove the 3.6V AA batteries. Wait 10 seconds. Re-insert the 3.6V AA batteries.
Flip the unit over. You’ll see a series of blinking lights while it searches for the network to join.
When you see solid red lights, the device is fully reset and re-activated and you should see data on the web dashboard.