Switch pins to display data point values

Owned by Brent Meriwether (Unlicensed)
Last updated: Dec 10, 2021
1 min read

The following will show you how to switch your Sensor Map pins so that they display specific data points next to the pin markers. You may find this feature handy if you are most interested in just one or two data points at the marker’s location – having these always displayed on the map can be a nice shortcut.

mceclip1.png

To switch the pin markers to show values:

  1. Click on the maker and access the settings cogwheel.

  2. Select the Sensor Data tab from the dialog that appears.

  3. Select whatever data points you want to be displayed and click on Done.

mceclip0.png

See this in action in the following video: