Changing Firmware from Verizon to Generic
Step 1
Using the Terminal, SSH into the Gateway
After SSHing into the Gateway please run command:
system_version konaLTEmodem.py -c 'at!gobiimpref?' konaLTEmodem.py -c "AT+CGDCONT?" /opt/chirpstack-gateway-bridge/chirpstack-gateway-bridge version /opt/mydevices/dps-client -v ifconfig eth0 | grep HWaddr
To verify that the Firmware is on Verizon
Step 2
Send command
curl https://hwdartifacts.blob.core.windows.net/hwdassets/SWI9X30C_02.38.00.00.cwe > /dev/shm/SWI9X30C_02.38.00.00.cwe curl https://hwdartifacts.blob.core.windows.net/hwdassets/SWI9X30C_02.38.00.00_GENERIC_002.082_000.nvu > /dev/shm/SWI9X30C_02.38.00.00_GENERIC_002.082_000.nvu /opt/Sierra/LteModemFW/lte-fw-download-script.sh generic /dev/shm/
To download and install the Generic Firmware. All 3 commands could be sent at the same time, but make sure to press ENTER when when the last command comes up.
Or you can send the commands 1 by 1.
This process should take about 5 - 10 minutes.
Step 3
To check that the firmware has indeed changed, run the commands in Step 1 to verify.