Configure Tektelic Gateways to Verizon

1. Open FileZila on local computer and login to the gateway IP: Host: 192.168.2.xxx, Username: Root, Password: Serial Number of Gateway, Port: 22
   
   

   Open

   

2. After connecting to the Gateway, go to dev/shm folders on the GW in FileZila and drag and drop both files SWI9X30C_02.33.03.00.cwe and SWI9X30C_02.33.03.00_VERIZON_002.079_002.nvu
   
   

   Open

   

3. Open Ubuntu, login to the Gateway with the IP Address 192.168.2.xxx and password: Serial Number of the GW and run this command to install the packages that were just copied into FileZila: /opt/Sierra/LteModemFW/lte-fw-download-script.sh vzw /dev/shm/ this process should take about 5-10 minutes. Gateway will automatically log off after. you will need to log back into the gateway after this.
   
   

    

4. Go back to FileZila and go to folders home/root to copy the modem-oma-dm-handler package
   
   

5. Go back to Ubuntu and run the command: opkg install modem-oma-dm-handler_0.6-r2_kona.ipk to install the package that was just copied for the verizon sim card to work. This process will not log you out of gateway, you can run step 6 right after.
   
   

6. in Ubuntu, run: system_versionkonaLTEmodem.py -c 'at!gobiimpref?'konaLTEmodem.py -c "AT+CGDCONT?"/opt/chirpstack-gateway-bridge/chirpstack-gateway-bridge version/opt/mydevices/dps-client -vifconfig eth0 | grep HWaddr to make sure that the process has been accomplished.
   
   

Side note: You can do step 2 and 4 at the same time, just make sure that they are put into the correct folders as it wont work if it is put in the wrong folder. The commands should not be run at the same time, they should be run at separate times, first run step 3 command then step 4 command. 

• If using a Verizon POD sim card, here is how the APN’s will look

LAST STEP:

Ask Tektelic to register the Gateway’s IMEI with Verizon.