Convert Tektelic Generic Firmware to 2.38.00.00

Copy these commands in the Terminal:

curl https://hwdartifacts.blob.core.windows.net/hwdassets/SWI9X30C_02.38.00.00.cwe > /dev/shm/SWI9X30C_02.38.00.00.cwe
curl https://hwdartifacts.blob.core.windows.net/hwdassets/SWI9X30C_02.38.00.00_GENERIC_002.082_000.nvu > /dev/shm/SWI9X30C_02.38.00.00_GENERIC_002.082_000.nvu
/opt/Sierra/LteModemFW/lte-fw-download-script.sh generic /dev/shm/

Note: All commands can be run separately or together. If commands are run together make sure to press “ENTER” when the command line gets to /opt/Sierra/LteModemFW/lte-fw-download-script.sh generic /dev/shm/ or else the command won’t go through. This process takes about 10 - 15 minutes, and the gateway will automatically disconnect.

Re-connect to the gateway and run

system_version
konaLTEmodem.py -c 'at!gobiimpref?'
konaLTEmodem.py -c "AT+CGDCONT?"
/opt/chirpstack-gateway-bridge/chirpstack-gateway-bridge version
/opt/mydevices/dps-client -v
ifconfig eth0 | grep HWaddr

to make sure that the command went through.