Dragino LWL02 Water Leak Sensor

Open

Activation

1. Open the unit by sliding off the plastic cover

2. Insert AAA batteries and flip over the unit.

3. Look for a red, then blue, then green light. Sensor should now be showing online in the web dashboard.

Installation

Peel off the included adhesive backing to affix to wall or other object. The metal prongs should sit on the floor so if water pools around them, the sensor will detect the water leak.

Reset

1. Open the unit by sliding off the plastic cover

2. Remove the AAA batteries. Wait 10 seconds. Re-insert the AAA batteries.

3. Sensor should now be showing online in the web dashboard.