GlobalSat PM2.5

Owned by Brent Meriwether (Unlicensed)
Aug 13, 2021
1 min read

Activation

Use the following instructions to setup your device.

  1. Connect antenna to the sensor.

  2. Connect power to the sensor using the included USB cable and power adapter.

  3. After a moment the device will power on and the LCD will initialize.

  4. The sensor is now ready for use.

Reset

In the event your device is offline or you need to reset it, please follow these steps.

  1. Disconnect power from the sensor.

  2. Wait several seconds and then reconnect power to the sensor. After a moment the device will power on and the LCD will initialize.

  3. The sensor is now ready for use.