Lansitec Temperature/Humidity + Probe

Open

Activation

1. Connect the antenna and probe to the sensor.

2. Using a screwdriver or other small object, change the switch to the ON position. A status indicator located next to the switch (in the sensor housing) will briefly change to red.

3. The sensor is now ready for use.

Reset

In the event your device is offline or you need to reset it, please follow these steps.

1. Using a screwdriver or other small object, change the switch to the OFF position.

2. Wait several seconds and then change the switch back to the ON position. A status indicator located next to the switch (in the sensor housing) will briefly change to red.

3. The sensor is now ready for use.