Advantech Wise 2410

Activation

1. Unscrew the cap and carefully remove the battery cartridge

2. Insert two 3.6V AA batteries (typical 1.5V AA batteries will not work here)

3. Re-insert the battery cartridge and screw back on the cap. The arrows on the sensor and the cap must match up when screwing back on the cap.

4. If you purchased the optional magnetic base, screw it onto the bottom now.

5. Turn on the sensor by pressing and holding the power button until you see a green light appear
   
   

Reset

1. Unscrew the cap and carefully remove the battery cartridge

2. Remove both 3.6V AA batteries

3. Re-insert both 3.6V AA batteries and re-insert the battery cartridge into the slot

4. Screw the cover back on. The arrows on the sensor and the cap must match up when screwing back on the cap.